Online Store

> Products > Flux / Solder Paste > Amtech NC-559-V2-TF Tacky Flux

Amtech NC-559-V2-TF Tacky Flux


Amtech NC-559-V2-TF

This Amtech NC-559-V2-TF is by far the best quality flux in the world. Any repair person will tell you that you are only as good technician as your tools and equipment. So why not buy the best flux for all your logic board repairs.

Amtech NC-559-V2-TF No-clean Solder Tacky Flux 30cc 16160 – manufactured by Inventec USA. No Plunger, No Dispensing Tip. This flux dispenses very slow and lasts for a long time, perhaps best flux ever made! Amtech advanced chemistries can be used for general touch-up and rework, attaching spheres to microelectronic packages, and solder Flip Chip components to various PCB substrates. Cleaning – No-clean tacky flux that can be left on the board for many SMT assemblies. For applications requiring cleaning NC-559-V2-TF can be cleaned using commercially available flux residue removers such INVENTEC Promoclean™ and Promosolv™ cleaning chemistries. Storage and Handling – Tacky flux should be stored at room temperature (20-25 °C). Syringes and cartridges should be stored vertically with the dispensing tip down. Properly stored tacky flux has a 12-month shelf life. Not a hazardous material for DoT.Flux allows solder to flow. Used for micro jumpers, chipset reflows, IC replacement and corrosion removal.

Amtech’s NC-559-V2-TF has many benefits over other brands.

  • The longer effective time before burning away
  • Easier to clean than other tacky fluxes once it burns away
  • Lasts longer if not stored properly/cap is not put back on

Why Amtech NC-559-V2-TF?

After using many other various brands for many years, our technicians encountered problems with the flux having bubbles of air in it as well as sticking to the logic boards making it harder to clean.

Amtech NC-559-V2 flux solved all these problems with ease. Firstly there are no air bubbles. Air bubbles make it harder to see the work you are doing under the microscope. Secondly, The melting point of the flux is perfect for any IC. Although the flux melts easily, however, it does not run off the board and stays at where you place it. Lastly, Amtech NC-559-V2-TF cleaning is easy compared to some other brands. Simple IPA wash or Ultrasonic bath cleans all the leftover flux after the repair.

All our products are in stock unless noted otherwise. We ship from Melbourne Australia.